• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

5 Tips For car keys repairs (you could try these out)

Modern car keys are complex, and they require professional help to repair them if something goes wrong. This article will offer 5 tips to ensure your car keys are in good working order.

In most instances, key fobs and remote controls can be repaired by simply replacing the battery. In certain cases it is necessary to reprogramme the device. Consult your owner’s manual or an expert for more specific instructions.

Battery Replacement

Many modern vehicles come with remote key fobs. These include remote starting and keyless entry features. They also have a traditional steel key car repair. They are powered by small batteries that eventually wear out and need to be replaced. Fortunately the process is easy and can be accomplished by any local auto accessory shop that stocks the correct type of battery for the car model you have.

First, check the owner's manual of your vehicle to find out the type of battery used in your key fob. Once you know this information, head to your local auto parts store and purchase the replacement. Sometimes, you can find the same battery at a discount or even for free with a special promotion.

Once you have the new battery and you've opened your key fob, then remove the circuit board by prying apart two of the seams using a screwdriver with a flat head or your fingernail (if you are careful not to force anything). Locate the battery compartment. It'll either be inserted or have a plus/minus symbol embossed. Place the new battery in carefully and make sure it is placed in the same way as your old one.

Replace the circuit board after the battery has been installed. Take the two halves back together. Test the buttons after reassembling them to make sure everything works. The identification of the key fob will not be affected when the battery is replaced therefore the key fob won't require reprogramming after the repair. This is great news for those who want to save money by not having to go to a locksmith or dealership.

Ignition Cylinder Replacement

Modern key ignition systems for cars are complicated and require a precise sequence of movements before the engine starts. A damaged key cylinder can stop your car from getting started. It is possible to replace the key cylinder but it is not an easy process. The ignition is a delicate device designed to work with a specific key and this process requires special tools, careful oiling, and a thorough understanding of how it's supposed to perform.

First, check whether the ignition is turning in the accessory position, and also if the key is inserted correctly. This will help you diagnose the problem and find the solution. If you're unable to get the cylinder rotating in any direction it is recommended to consult your owner's manual or contact a professional locksmith to help with the ignition repair.

If the cylinder is able to rotate in the accessory position then you can make use of a screwdriver to press the small anti-rotation button located at the bottom of the cylinder. You can then rotate the cylinder until the retaining tab and slot line up, and then slide it out of its casing. If the cylinder doesn't move at all, or it's stuck in a dead end, you may need to gently tap it with an hammer or drill. But only do so cautiously, as drilling or rapping the cylinder can damage the steering column.

When the old cylinder is out, the new ignition cylinder will be installed in its place. After that, you'll need to program the new cylinder to ensure that it is in line with the key in terms of sequence and orientation. It is also necessary to remove and inspect the tumblers. If any of the tumblers appear damaged, you'll have to replace them.

When the cylinder is replaced after which you'll need to connect the dashboard and steering column covers in the correct order. Be sure to carefully reattach the panels without damaging the wiring, as it's easy to lose the connection and damage vital electronics. It's also essential to reconnect the negative battery cable and then test your new ignition.

Key Programming

Modern car keys come with a computer chip that communicates with the vehicle. In order for the keys to start the engine, the chip and car need to "know each the other".

A locksmith with experience in many different kinds of vehicles can reprogram a new key quickly. They can also assist you if your car key's lock has been damaged.

Many car locksmiths will inform you that the process can be as quick as one minute if all steps are taken in the right order. OBD2 or EEPROM programming may take a little longer, since your locksmith will need to remove certain modules from the vehicle to read the passcode and key information. These kinds of procedures are best left to professionals who have extensive knowledge of circuit boards and electronics which reduces the chance of data corruption.

It's not common for people to lose keys to their cars or leave them in the trunk of the vehicle or forget them after loading groceries in the back of the vehicle. In these situations, it's not uncommon to be stuck at the side of the highway without a way to get to your home or where you want to go. Your locksmith can program a spare key for your vehicle to allow you to drive once more.

Car keys may stop working for a variety of reasons, such as normal wear and tear, or when the lock is damaged. If your car key's teeth aren't fitting the lock as well, it is a good reason to replace your key.

A lot of people try to reprogram their car keys themselves, but it is always recommended that you have a professional do this work for instead. It's not uncommon for DIY methods to corrupt the information on your key and cause it to fail, or worse cause damage to your security system. A professional will have a much less chance of making a mistake that could cost you thousands of dollars in the future.

Broken Key Removal

You'll have to remove your broken key from the ignition cylinder in case it fails to function. You won't be able to drive your vehicle until the key is removed, and it is recommended to contact an expert for this job, as there is a risk of causing damage to the ignition by the wrong use of lubricants and extraction tools. If you're looking to repair your car keys that have broken at home There are a few options that could aid.

A pair of needle-nosed, pliers with extra long tips can be used to grasp the key end that is still sticking out of the ignition. You can also give your pliers a boost by coating the business end of them with a sticky substance such as super glue, melted tallow, or putty. The pliers can then latch onto the fragment of key and remove it from the cylinder.

A flexible, thin wire can be used to slide across the broken part of a key and then pull it out of the lock. Paperclips can be used to accomplish this however, bend the ends a bit so that the fragment of the key is held by the larger surface area.

Mini hacksaw blades can be used to repair broken keys. They must be extremely small and thin to fit inside the small openings in the cylinders for ignition. These tools can be purchased at hardware stores or in the auto parts sections of some large box retailers.

Spraying a bit of oil into the key hole could be a great idea, as it could loosen the car key and make it easier to get it out. Don't try to force a broken car key out, since this could cause further damage to the key, and even the ignition. It can be dangerous and difficult to repair a car key that is bent or split in half. Keep the spare key in a safe location always.